Welcome to Country Kids on the Fly - Fly Tying Page. Here you will find fly tying instructions for trout, steelhead, salmon, bass, carp, and other warmwater fly patterns. This page will be updated weekly, so check back regulary for new patterns. If you do not see a fly pattern you would like to tie, and would like me to put the pattern on this page, or if you have any questions about the fly patterns regarding tying, fishing, etc., please email me at countrykidsonthefly@gmail.com.
All the flies featured in this Fly Tying page are avaiable custom tied from Autumn Siren Flies.

Thursday, August 30, 2012

Art's Fighting Crayfish


Here is another great multispecies fly pattern from warmwater expert and CKOF instructor Art Estus. This fly has caught bass, carp, steelhead, and trout.  Crayfish are a common forage food for smallmouth bass, catfish, carp, and trout in the western New York/NW Pennsylvania area.  This pattern is designed to sit vertically when at rest and darts when stripped, imitating the swimming position of a crayfish.  Art's Fighting Crayfish is best fished while a long, quick strips with long pauses in between strips.  Tie some up and be ready for some warmwater action.
Note: This is a more complicated fly. 

Hook: Daiichi  or MFC   size 8
Thread: rusty 3/0
Weight: gold conehead, leadwire, and medium black beadchain eyes
Antennae: moose mane
Legs: rusty brown (red) squirrel tail
Body: rusty hares ear dubbing
Rib: large gold wire
Wingcase: turkey

STEP 1: Take a a heavy wire streamer hook, slip on a gold brass conehead, and wrap 10 wraps of .030 leadwire onto the hook shank. Attach your rusty 3/0 thread. (Picture 1A)

Picture 1A

 At the tie in point attach approx. 4-6 strands of moose mane that extend approx. 1 1/2 in beyond the hook bend to form antennae. (Picture 1B)

Photo 1B
 
 Dub a small ball of rusty brown dubbing at the tie in point. (Photo 1C)

Photo 1C

STEP 2: Cut a clump of rusty brown (red) squirrel  tail approx. the size of a pencil. Hold the clump in your fingers and with approx. 1" extending from the hook shank tie in the squirrel tail so that the hair covers all 360 degrees of the hook shank. Trim off the butts and secure with many thread wraps. Be sure to wrap your thread far enough down the shank that the hair begins to flair (this is why you dubbed a small ball of dubbing earlier).

Photo 2


STEP 3: To form the pincers, wet your fingers and pull the clump of hair apart and twist to form 2 pincers.  Figure 8 wrap between the pincers to secure them.  Place a drop of head cement on the pincers.



STEP 3: Directly in front of the pincers tie in a black medium beadchain eye using figure 8 wraps on the top of the shank.  (Photo 3A)


Flip the fly upside down in your vise with the hook point pointing up. (Photo 3B)



STEP 4: Tie in a piece of turkey and a length of gold wire behind the beadchain eyes.




STEP 5: Dub a large body of rusty colored hares ear or wool dubbing.



STEP 6: Pull the turkey over the body to form the wingcase. Trim off.



STEP 7: Finally, rib the body with the copper wire, trim off.  Whip finish off your thread and apply a drop of head cement.




A finished Art's Fighting Crayfish.
 
Channel Catfish on the Art's Fighting Crayfish.
A smallmouth bass from a float on the Allegheny.

 
Tyler Straight
Custom Tied Steelhead Flies
CKOF Website Design

Saturday, August 25, 2012

Mysis Shrimp


The Mysis Shrimp (mysis reltica) is a staple food source for fish in the Great Lakes.  According to biologists, Mysis shrimp can make up to 50% of a steelhead's diet when in the lake (the rest being baitfish such as Erie Shiners).  Before the steelhead run the creeks in the fall, they gorge heavily on these shrimp.  Although it is believed steelhead eat this fly out of instinct from their time spent in the lake (the same reason Northwest steelhead fisherman use flies imitateing squid and prawn), I have found Mysis shrimp will scouting Chautauqua Creek this summer, so it is possible steelhead still feed on them in the streams.  If you are familiar with western tailwaters, this is the same shrimp that grows big trout in the Frying Pan and other Colorado rivers.

Hook: MFC 7231 Size 12-10
Weight: small black beadchain
Thread: white 6/0
Shellback: white poly yarn
Body: white Estaz
Rib: 6 lb. clear mono



STEP 1: With your hook in the vice, attach your white 6/0 thread midway up the shank and then tie in a small black beadchain eye using figure 8 wraps. Wrap back to the tie in point.


STEP 2: At the tie in point tie in a ~ 1 1/2 in. piece of white poly yarn.


STEP 3: Next tie in a piece of white Estaz and a length of length of clear 6 lb. mono. Wrap your thread up to the beadchain eyes.


STEP 4: Wrap the white Estaz up to the beadchain eyes, tie off the Estaz behind the eyes.


STEP 5: Pull the white poly yarn over the Estaz body to form a wingcase.  Tie off in front of the beadchain eyes.  There should be approx. 1/4 in. over overhang on the poly yarn on both ends of the fly to imitate a tail and antennae.


 STEP 6: Finally, rib the wingcase and body with the 6 lb. mono.  Tie off the mono in front of the eyes.  Whip finish and cut your thread.  Put a drop of head cement on the knot.



Although I have not used this pattern yet for steelhead, after reading some articles about steelhead diet, I believe this could be the next big fly pattern for steelhead.  Tie up a few and fish them as you would a egg or nymph.


Tyler Straight
Custom Tied Steelhead Flies
CKOF Website Design

Tuesday, August 21, 2012

Steelie Caddis


 The Steelie Caddis is one of my most productive spring steelhead flies, second only to White Death.  This pattern imitates the green caddis larvae that inhabit great lake tributaries.  This fly is particularly affective for spawning bucks, even when other flies won't work.  Try this fly with a dropper (an egg or other caddis pattern) during high water and during low water sigh fishing conditions forgo the dropper (to avoid accidentally snagging fish) and fish on a long, light (4x) leader with no indicator. 

Hook: Daiichi 1120 or MFC 9045 size 10-12
Weight: gold beadhead (MFC Gold Brass 1/8" for sz. 12 and 5/32" for sz. 10)
Thread: black 6/0
Body: chartreuse Diamond Braid
Hackle: light brown hen back
Head: black angora



 STEP 1: Take a  Daiichi 1120 or MFC 9045 and put a gold beadhead on the hook.  Attach your black thread and wrap past the tie in point.

 
STEP 2: Tie in a 6" piece of chartreuse Diamond Braid and wrap the black thread up the shank stopping approx. 1/8" behind the beadhead.


STEP 3: Wrap the diamond braid up to your thread and tie off the material and trim.  Make sure you trim the material so there is a short vertical tag of diamond braid.

STEP 4:  In the notch you created tie in a tan hen back feather by its tips.

STEP 5: Wrap the hen back 2 times.  Tie off the hackle in the notch you created in the diamond braid.  Wrap your thread forward to behind the beadhead.


STEP 6: Dub a small head with black angora dub.  Make a few wraps and whip finish. Go Fishing!

Be sure to tie at least a dozen Steelie Caddis before going fishing.  You will many during a day on the water.


The steelie caddis works great as the point fly in a tandem rig with a egg as the dropper.
On Oct. 1, 2012 tandem rigs are now legal for Lake Erie steelhead tributaries.

The Steelie Caddis is the only pattern I've tried that I caught a fish on the first cast.
This fish hit on the first cast of the day.

Art with a chautauqua creek hen.



Tyler Straight
Custom Tied Steelhead Flies
countrykidsonthefly@gmail.com

Steelhead Iced Caddis


During the fall ans spring, steelhead prey heavily on the green caddis present in steelhead alley tributaries. This pattern is highly effective in the spring, especially for spawning bucks.  This pattern works when the fish refuse a white death.

Hook: MFC 7077 Size 10-12
Weight: .020 leadwire
Thread: black 6/0
Body: Chartreuse Diamond Braid
Back: Peacock Herl
Head: Peacock Herl


 STEP 1: Put 10 wraps of .20 lead wire onto a MFC 7077 0XL Wet Fly hook size 10 or 12.  Place hook into your vise and attach your 6/0 black thread.


 STEP 2: At the tie in point attach 5 peacock herls to the top o the shank and a length of chartreuse Diamond Braid.  Wrap your thread a little more than 2/3 the way up the hook shank.


STEP 3: Wrap the diamond braid forward 3/4 the way up the shank to form the body.  Tie off and trim.


STEP 4: Bring the herl forward over the body form a back.  Tie off but DO NOT TRIM!


STEP 5:  Wrap the butts of the left over peacock herl to form the head. Tie off and whip finish.


STEP 6: To protect the delicate peacock herl put a drop of head cement on the fly.


Monday, August 13, 2012

Hexagaina Nymph


 The Hexagaina nymph is present in huge numbers along the shore of Lake Erie and tributaries (if you have ever experienced the spectacular "Michigan Caddis" hatch in June this is the nymph). Steelhead prey heavily on these nymphs both in the lake and in the streams during their spawning run.  I find Hexagaina nymphs to be most effective early in the run (late-September to early-October) although steelhead will take it in winter and spring.  Since Hexagainas are burrowing nymphs, they are most effective when fished over the muddy/silty bottoms found near the mouths of creeks.  This is also a highly effective fly for spring Smallmouth Bass.

Hooks: Daiichi 1260 or MFC 7231 size 8-10
Weight: black beadchain eyes
Thread: tan 6/0
Tail: orange Glo-Bug yarn
Body: gray ostrich herl
Rib: medium copper wire
Back: pearl flashabou
Hackle: tan hen back
Wingcase: turkey
Thorax: gray ostrich herl


Fat early run Steelhead love Hex Nymphs.

Sunday, August 12, 2012

Estaz Spawn

I invented Estaz Spawn several years ago for steelhead.  Estaz Spawn is tied just like Sucker Spawn except Estaz is used instead of angora or diamond braid.  Estaz is one of my favorite materials for steelhead as it is easy to tie with, bright, and comes in many colors.  Estaz Spawn is my go to fly pattern during all water conditions in steelhead alley.  Pink is the most effective all year long, while Orange works well during low water in the early fall, and Chartreuse produces best in spring.  Were legal (Effective 10/1/12: Multiply flies may now be used on Lake Erie tributaries) I will fish a tandem rig of two different colored Estaz Spawns.  If one color is out producing the other (usually Pink) I will switch to two of the same color.

Hook: Daiichi 1120 or MFC 7045 Size 12
Thread: 6/0 color to match estaz
Body: Estaz
Colors: Pink, Chartreuse, Orange, Red, Blue

STEP 1: Select a Daiichi 1120 Size 12 and place it in your vice.  Attach your thread and wrap back to the tie in point (Picture 1A).  Tie in a length of estaz (Picture 1B).

Picture 1A

Picture 1B

STEP 2: To make the body make 4 small loops, one in front of each. I call this the "sucker spawn method". To make the loops, advance your thread by 2 wraps, bring the estaz forward and tie off (Picture 2A).  Repeat this to form 3 more loops (Picture 2B)

Picture 2A

Picture 2B


STEP 3: Once finished whip finish and trim off your thread.  With practice this fly should take you 1-2 minutes to complete.  It is a simple, effective fly for steelhead and fall/winter trout. 

Finished Estaz Spawn

 Chartreuse Estaz Spawn

From Right to Left: Pink, Chartreuse, Orange, and Blue Estaz Spawn


A fat inland Brown Trout from a local stream.
All the flies shown in CKOF Fly Tying are avaiable from Autumn Siren Flies.